free portfolio site templates
Mobirise





All in 1 DTHR 150/300

Technical Specification

300150
HOLE DIAMETER 6 1/2” (165mm) Up to Max.300Meters depth4 1/2" (114mm) , 6 1/2” (165mm) Up to Max.150Meters depth
DEPTH300 MTR150 MTR
TRUCKAS PER CUSTOMER REQUIREMENT AS PER CUSTOMER REQUIREMENT
PRIME MOVERTruck engine As per customer requirementTruck engine As per customer requirement
MOUNTING PLATFORM STRUCTUREElectrically welded steel structure covered with 5mm chequared plate and a channel to hold the whole structure. Electrically welded steel structure covered with 5mm chequared plate and a channel to hold the whole structure. 
MAST ASSEMBLYSturdy structural RHS tubular structure electrically welded.
 Raising and Lowering: by Hydraulic Cylinder
Mast overall Length - 9000mm
Rotary Head travel  - 7000mm
Centralize opening - 16” (407mm)
Sturdy structural RHS tubular structure electrically welded.
 Raising and Lowering: by Hydraulic Cylinder
Mast overall Length - 4500mm
Rotary Head travel - 3300mm
Centralize opening - 16” (407mm)
FEED SYSTEMFeed & Hoist actuation - Pulley, wire rope & Hydraulic cylinder.
 Having adequate travel to handle drill pipes and casing pipes upto 6 Mtr. Long.
 Feed system consists of Hold back arrangement to control limit weight on bit, rapid and slow feed arrangement to suit variable ground condition.

Feed cylinder Size & stroke - Dia 125mm x Dia 70mm x 1400mm lg. 1No.
Pull up force - 22712 Kgf
Pull down force - 11158 Kgf
Hoisting speed - (UP) 45Mtr/ Minute
Reeving Ratio - 1:3s
Feed & Hoist actuation - Pulley, wire rope & Hydraulic cylinder.
 Having adequate travel to handle drill pipes and casing pipes upto 6 Mtr. Long.
 Feed system consists of Hold back arrangement to control limit weight on bit, rapid and slow feed arrangement to suit variable ground condition.

Feed cylinder Size & stroke - Dia 125mm x Dia 70mm x 1400mm lg. 1No.
Pull up force - 18108 Kgf
Pull down force - 12243 Kgf
Hoisting speed - (UP) 45Mtr/ Minute
Reeving Ratio - 1:3s
ROTARY HEAD ASSEMBLY
(TOP HEAD DRIVE)
Fabricated steel body
 The RH unit travels on Mast assembly to absorb sudden shock loads encountered during drilling operation.
 It will be operated by Danfoss OMV400.

Torque - 432 Kg.m
Rotation Speed - Spindle RPM: 0-100
Fabricated steel body
 The RH unit travels on Mast assembly to absorb sudden shock loads encountered during drilling operation.
 It will be operated by Danfoss OMV315-1No.

Torque - 370 Nm
Rotation Speed - Spindle RPM: 0-100
HYDRAULICSMax operating pressure - 220 Kg/Cm2
Tank capacity - 800 Liters

Filtration (Nom) – Return line - 10/25 Microns
 Cooling: Fin type oil to Air.
 Pumps: CASAPPA 50 GPM 2 nos.,Yukan 14 GPM 1 no. and Yukan 5 GPM 1 no. (max 210PSI)

Max operating pressure - 210 Kg/Cm2
Tank capacity - 480 Liters

Filtration (Nom) – Return line - 10/25 Microns
 Cooling: Fin type oil to Air.
 Pumps:Casappa 45 GPM-1 No. 

CONTROL PANELAll Necessary control and monitoring valves and gauges are installed at control panel located nearer to drilling point for driller convenienceAll Necessary control and monitoring valves and gauges are installed at control panel located nearer to drilling point for driller convenience
AUXILIARY
StabilizerModel - Hydraulically operated Box Type telescopic
Cylinder bore diameter - Dia 90mm x Dia 56mm
Stroke - 850mm
No. of Jacks - 4 Nos


The above jacks are provided with ‘Reverse Flow restricted’ valves to ensure safe operation.
Two rear jacks are operated with two separate valves and two front jacks are operated with a single valve. 
Model - Hydraulically operated Box Type telescopic
Cylinder bore diameter - Dia 90mm x Dia 56mm
Stroke - 650mm
No. of Jacks - 4 Nos

The above jacks are provided with ‘Reverse Flow restricted’ valves to ensure safe operation.
Two rear jacks are operated with two separate valves and two front jacks are operated with a single valve. 
Break out Winch The drill Rig is equipped with hydraulic operated break out wrench for making and breaking the drill pipes and Hammer.

Cylinder bore diameter - Dia 100mm x Dia 56mm
Stroke                          - 350mm
The drill Rig is equipped with hydraulic operated break out wrench for making and breaking the drill pipes and Hammer.

Cylinder bore diameter - Dia 80mm x Dia 45mm
Stroke                            - 635 mm
Mast raising Cylinder  For raising and lowering the Mast Assembly

Cylinder bore diameter - Dia 125mm x Dia 70mm 
Stroke                            -  800mm
For raising and lowering the Mast Assembly

Cylinder bore diameter - Dia 100mm x Dia 63mm
Stroke                            - 600mm
Water Injection Pump Hydraulically operated triplex water injection pump, for injecting water/Foam with Necessary piping and        flow control valves

Max. Flow       - 80 Liter/minute
Max. Pressure - 40kg/cm2
 Hydraulically operated triplex water injection pump, for injecting water/Foam with Necessary piping and        flow control valves

Max. Flow       - 80 Liter/minute
Max. Pressure - 40kg/cm2
Auxiliary Winch  Hydraulically operated winch to handle the Drill pipes, tools and Rod Changer assembly,other accessories
Bare drum-Pull - 1000 kgf
Max. Speed - 20 Meter/minute 
 Hydraulically operated winch to handle the Drill pipes, tools and Rod Changer assembly,other accessories
Bare drum-Pull - 1000 kgf
Max. Speed - 20 Meter/minute 
Single Rod Changer AssemblyManually operated Single Rod changer for changing/adding the drill pipes. Hydraulically operated triplex water Manually operated Single Rod changer for changing/adding the drill pipes.
Welding generator Hydraulically driven Welding generator for welding and cutting of steel casing pipes.
Capacity - 400 Amps @ 60% duty cycle

 Hydraulically driven Welding generator for welding and cutting of steel casing pipes.
Capacity - 400 Amps @ 60% duty cycle

Air compressor1100 cfm/300 psi600 cfm/200 psi

Enquiry Form

Contact us

Ready for offers and cooperation

Phone: +91 9600535555
             +91 9443358555
             +91 9578557555
             +91 9600883555
Email:   sonyrigs@gmail.com
             sales@sonyrigs.com

© Copyright 2018 Sonyrigs - All Rights Reserved