|HOLE DIAMETER||4 1/2" (114mm) , 6 1/2” (165mm) Up to Max.150Meters depth|
|TRUCK||As per customer requirement|
|PRIME MOVER||Truck engine any other customer requirement|
|MOUNTING PLATFORM STRUCTURE||Electrically welded steel structure covered with 5mm chequared plate and a channel to hold the whole structure.|
|MAST ASSEMBLY||Available Sizes : 3Mtr, 6 Mtr, 9Mtr|
Sturdy structural RHS tubular structure electrically welded.
Raising and Lowering: by Hydraulic Cylinder
Mast overall Length - 4500mm
Rotary Head travel - 3300mm
Centralize opening - 16” (407mm)
|FEED SYSTEM||Feed & Hoist actuation - Pulley, wire rope & Hydraulic cylinder.
Having adequate travel to handle drill pipes and casing pipes upto 6 Mtr. Long.
Feed system consists of Hold back arrangement to control limit weight on bit, rapid and slow feed arrangement to suit variable ground condition.
Feed cylinder Size & stroke - Dia 125mm x Dia 70mm x 1400mm lg. 1No.
Pull up force - 15400 Kgf
Pull down force - 10570 Kgf
Hoisting speed - (UP) 45Mtr/ Minute
Reeving Ratio - 1:3s
|ROTARY HEAD ASSEMBLY|
(TOP HEAD DRIVE)
|Fabricated steel body|
The RH unit travels on Mast assembly to absorb sudden shock loads encountered during drilling operation.
It will be operated by Danfoss OMV315-1No.
Torque - 370 Nm
Rotation Speed - Spindle RPM: 0-100
|CONTROL PANEL||All Necessary control and monitoring valves and gauges are installed at control panel located nearer to drilling point for driller convenience|
|Break out Winch||The drill Rig is equipped with hydraulic operated break out wrench for making and breaking the drill pipes and Hammer.
Cylinder bore diameter - Dia 80mm x Dia 45mm
Stroke - 635 mm
|Mast raising Cylinder||For raising and lowering the Mast Assembly
Cylinder bore diameter - Dia 100mm x Dia 63mm
Stroke - 600mm
|Air compressor||1100 cfm/ 300psi|
Phone: +91 9600535555