best free html templates

Tractor DTH 150

HOLE DIAMETER4 1/2" (114mm) , 6 1/2” (165mm) Up to Max.150Meters depth
TRUCKAs per customer requirement
PRIME MOVERTruck engine or any other customer requirement
MOUNTING PLATFORM STRUCTUREElectrically welded steel structure covered with 5mm chequared plate and a channel to hold the whole structure. 
MAST ASSEMBLYSturdy structural RHS tubular structure electrically welded.
 Raising and Lowering: by Hydraulic Cylinder
Mast overall Length - 4500mm
Rotary Head travel  - 3300mm
Centralize opening  - 16” (407mm)
FEED SYSTEMFeed & Hoist actuation - Pulley, wire rope & Hydraulic cylinder.
 Having adequate travel to handle drill pipes and casing pipes upto 6 Mtr. Long.
 Feed system consists of Hold back arrangement to control limit weight on bit, rapid and slow feed arrangement to suit variable ground condition.

Feed cylinder Size & stroke - Dia 125mm x Dia 70mm x 1400mm lg. 1No.
Pull up force                      - 18108 Kgf
Pull down force                 - 12243 Kgf
Hoisting speed                   -  (UP) 45Mtr/ Minute
Reeving Ratio                    -  1:3s
Fabricated steel body
 The RH unit travels on Mast assembly to absorb sudden shock loads encountered during drilling operation.
 It will be operated by Danfoss OMV315-1No.
Torque              - 370 Nm
Rotation Speed - Spindle RPM: 0-100
HYDRAULICSMax operating pressure - 210 Kg/Cm2 
Tank capacity - 480 Liters

Filtration (Nom) – Return line - 10/25 Microns
 Cooling: Fin type oil to Air.
 Pumps:Casappa  45 GPM-1 No. 

CONTROL PANELAll Necessary control and monitoring valves and gauges are installed at control panel located nearer to drilling point for driller convenience
StabilizerModel                           - Hydraulically operated Box Type telescopic
Cylinder bore diameter - Dia 90mm x Dia 56mm
Stroke                           - 650mm
No. of Jacks                  - 4 Nos

The above jacks are provided with ‘Reverse Flow restricted’ valves to ensure safe operation.  Two rear jacks are operated with two separate valves and two front jacks are operated with a single valve.
Break out WinchThe drill Rig is equipped with hydraulic operated break out wrench for making and breaking the drill pipes and Hammer.

Cylinder bore diameter - Dia 80mm x Dia 45mm
Stroke                           - 635 mm
Mast raising Cylinder For raising and lowering the Mast Assembly

Cylinder bore diameter - Dia 100mm x Dia 63mm 
Stroke                            -  600mm
Water Injection Pump Hydraulically operated triplex water injection pump, for injecting water/Foam with Necessary piping and flow control valves

 Max. Flow       - 80 Liter/minute
 Max. Pressure - 40kg/cm2
Auxiliary Winch  Hydraulically operated winch to handle the Drill pipes, tools and Rod Changer assembly,other accessories
Bare drum-Pull - 1000 kgf
Max. Speed       - 20 Meter/minute

Single Rod Changer Assembly Manually operated Single Rod changer for changing/adding the drill pipes.
Welding generator Hydraulically driven Welding generator for welding and cutting of steel casing pipes.
Make      - Swaraj or any other reputed Make
Capacity - 400 Amps @ 60% duty cycle

Air compressor 600cfm/200psi 

Enquiry Form

Contact us

Ready for offers and cooperation

Phone: +91 9600535555
             +91 9443358555
             +91 9578557555
             +91 9600883555

© Copyright 2018 Sony Rigs- All Rights Reserved